LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2020 >> Sentra SV >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Basic Inspection >> Additional Service When Replacing IPDM E/R >> Work Procedure >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure: Procedure

  1. SAVING VEHICLE SPECIFICATION 

    SYMBOL CONSULT

    1. Ignition switch ON.
    2. Select the "IPDM E/R" of "Re/programming, Configuration".
    3. Select the "Before ECU Replacement" of "Vehicle Configuration" to save current vehicle specification.
    NOTE: If vehicle specification cannot be saved with "Before ECU Replacement" of "Vehicle Configuration", perform "After ECU Replacement" of "Manual selection" to write vehicle specification.

    GO TO 2.

  2. REPLACE IPDM E/R 
    1. Ignition switch OFF.
    2. Replace IPDM E/R. Refer to Removal and Installation .

    GO TO 3.

  3. WRITING VEHICLE SPECIFICATION 

    SYMBOL CONSULT

    1. Ignition switch ON.
    2. Select the "IPDM E/R" of "Re/programming, Configuration".
    3. Select the vehicle specifications saved with "Before ECU Replacement" and then write them to the replacement IPDM E/R. Refer to Work Procedure .

    Work End.

scientia non olet · About LEMON Manuals