Component Description
|
No. |
Component |
Function |
|
|
1. |
Yaw rate/side/decel G sensor |
Refer to Yaw Rate/Side/Decel G Sensor . |
|
|
2. |
Steering angle sensor |
Refer to Steering Angle Sensor . |
|
|
3. |
Front wheel sensor LH (RH similar) |
Refer to Wheel Sensor and Sensor Rotor . |
|
|
4. |
Stop lamp switch |
Refer to Stop Lamp Switch . |
|
|
5. |
Parking brake switch |
Detects the operation status of parking brake switch and transmits converted electric signal from combination meter to ABS actuator and electric unit (control unit). |
|
|
6. |
Rear wheel sensor LH (RH similar) |
Refer to Wheel Sensor and Sensor Rotor . |
|
|
7. |
Combination meter |
Mainly transmits the following signal to ABS actuator and electric unit (control unit) via CAN communication:
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:
Refer to Component Location for detailed component location. |
|
|
8. |
VDC OFF switch |
Refer to VDC OFF Switch . |
|
|
9. |
Brake fluid level switch |
The brake fluid level switch converts the brake fluid level to an electric signal and transmits it to the ABS actuator and electric unit (control unit). |
|
|
10. |
ABS actuator and electric unit (control unit) |
||
|
11. |
Hill descent control switch (if equipped) |
Refer to Hill Descent Control Switch . |
|