Fuel Pressure Release

With CONSULT

1. Turn ignition switch ON.
2. On CONSULT screen, select "ENGINE">>"Active Test" >> "FPCM".
3. Start engine.
4. After engine stalls, crank it two or three times to release all fuel pressure.
5. Turn ignition switch OFF.

Without CONSULT

1. Pull out 15A fuse (No. 26) from IPDM E/R. Refer to IPDM E/R Terminal Arrangement .
2. Start engine.
3. After engine stalls, crank it two or three times to release all fuel pressure.
4. Turn ignition switch OFF.
5. Reinstall fuel pump fuse after servicing fuel system.

INSPECTION END