Component Description
|
No. |
Component |
Function |
|
|
1. |
Stop lamp relay |
Refer to Stop Lamp Relay . |
|
|
2. |
Combination meter |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:
Refer to Component Location for detailed component location. |
|
|
3. |
Accumulator |
||
|
4. |
Brake fluid level switch (part of brake fluid reservoir) |
Refer to Brake Fluid Level Switch . |
|
|
5. |
ABS actuator and electric unit (control unit) |
Motor/accumulator assembly |
Refer to Stop lamp relay . |
|
Motor relay |
|||
|
Actuator relay (main relay) |
|||
|
ABS IN valve |
|||
|
ABS OUT valve |
|||
|
Cut valve 1 |
|||
|
Cut valve 2 |
|||
|
Suction valve 1 |
|||
|
Suction valve 2 |
|||
|
Accumulator pressure sensor |
|||
|
Master cylinder pressure sensor |
|||
|
6. |
VDC OFF switch |
Refer to VDC OFF Switch . |
|
|
7. |
Steering angle sensor |
Refer to Steering Angle Sensor . |
|
|
8. |
Stop lamp switch |
Refer to Stop Lamp Switch . |
|
|
9. |
Yaw rate/side/decel G sensor |
Refer to Yaw Rate/Side/Decel G Sensor . |
|
|
10. |
Front wheel sensor LH (RH similar) |
Refer to Wheel Sensor and Sensor Rotor . |
|
|
11. |
Rear wheel sensor LH (RH similar) |
Refer to Wheel Sensor and Sensor Rotor . |
|