LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2021 >> Sentra S >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Chassis Control System >> System Description >> Diagnosis System [Chassis Control Module (With Built In Steering Angle Sensor)] >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Item

[Unit]

Description

IGN VOLT

[V]

Displays the ignition power supply voltage.

CONTROL MODULE MALF

[Off / On]

Displays the chassis control module (with built in steering angle sensor) malfunction.

Diag permission condition

Not permission / Permission / Not Used / Abnormal

Displays the diagnosis status.

VEHICLE SPEED

[km/h]

Displays the vehicle speed.

FR WHEEL SPEED

[RPM]

Displays the rotational speed of front RH tire.

FL WHEEL SPEED

[RPM]

Displays the rotational speed of front LH tire.

RR WHEEL SPEED

[RPM]

Displays the rotational speed of rear RH tire.

RL WHEEL SPEED

[RPM]

Displays the rotational speed of rear LH tire.

STEERING ANG SENSOR

[deg]

Displays the steering angle.

DECEL G SENSOR

[G]

Displays the decel G.

SIDE G SENSOR

[G]

Displays the side G.

YAW RATE SENSOR

[deg/s]

Displays the yaw rate.

ACCELE PEDAL POSITION

[%]

Displays the accelerator pedal position.

Throttle control

NORMAL / INCORR / PREV / INPOSSI

Displays the electric throttle status.

SHIFT POSITION

[-]

Displays the shift position.

STOP LAMP SW

[INACT / ACTIVE]

Displays the stop lamp switch status.

PRESS SENSOR

[bar]

Displays the brake fluid pressure.

ABS

[INACT / ACTIVE]

Displays the ABS function status.

ABS MALF

[Off / On]

Displays the ABS malfunction status.

EBD

[INACT / ACTIVE]

Displays the EBD function status.

TCS

[INACT / ACTIVE]

Displays the TCS function status.

TCS MALF

[Off / On]

Displays the TCS malfunction status.

VDC

[INACT / ACTIVE]

Displays the VDC function status.

VDC MALF

[Off / On]

Displays the VDC malfunction status.

VDC OFF SWITCH

[Off / On]

Displays the VDC OFF status.

AEB CVT PERMIT

[Off / On]

Displays the transaxle authorized state for intelligent engine brake function.

AEB STATUS

[Off / On]

Displays the setting status of intelligent engine brake function.

AEB COMMAND 1

[G]

Displays the relative command value of intelligent engine brake function.

AEB COMMAND 2

[G]

Displays the relative command value of intelligent engine brake function.

AEB SLIP RATE

[%]

Displays the slip ratio of intelligent engine brake function is operating.

ABH stop hold request 1

[-]

Displays but not used.

ICC status

[-]

Displays but not used.