Component Inspection

1. Turn ignition switch OFF.
2. Disconnect heated oxygen sensor 2 harness connector.
3. Check resistance between heated oxygen sensor 2 terminals as follows.

   Heated oxygen sensor 2		Condition		Resistance
   +	-
   Terminal
   4	3	Temperature	25 deg. C (77 deg. F)	5.4 - 7.3 Ohms
   1	2			Not existed
   	3
   	4
   4	1
   	2

Is the inspection result normal?

YES

INSPECTION END

NO

Replace malfunctioning heated oxygen sensor 2.