Special Repair Requirement

PERFORM ZERO POINT RESET
CONSULT
1. Perform preliminary checks:
  NOTE:
  - Level the vehicle
  - Minimize vibrations near the vehicle
  - Remove any objects on passenger seat
  - Do not touch the vehicle during zero point reset
2. Select "Start" on "Zero point reset function" screen from "Work support" mode of "OCCUPANT DETECTION".
3. "Zero point reset function" starts.
GO TO 2.
CONFIRM RESET
CONSULT

Check that "Complete" is displayed on "Zero point reset function".
CAUTION:
- "Complete" may be displayed if the seat has been reinstalled, or "Zero point reset function" has already been performed.
- "Incomplete" may be displayed if a new seat is installed.
- Air bag warning lamp flashes in user mode if zero point reset is "incomplete".
Is zero point reset status "complete"?

YES

Print out "Zero point reset current status" screen. Inspection End.

NO

Recheck the preliminary check items and perform zero point reset again.