Diagnosis Description: Function
|
Diagnostic test mode |
CGW Status |
Description |
||
|
Restricted Mode |
Diag Test Mode |
Open Mode |
||
|
Self Diagnostic Result |
Display |
Display |
Display |
Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly.* |
|
CGW Information |
Display |
Display |
Display |
|
|
Data Monitor |
Display |
Display |
Display |
Input/Output data in the ECM can be read. |
|
Work Support |
Non-display |
Non-display |
Display |
This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT unit. |
|
Active Test |
Non-display |
Display |
Display |
Diagnostic Test Mode in which CONSULT drives some actuators apart from the ECMs and also shifts some parameters in a specified range. |
|
DTC Work Support |
Non-display |
Display |
Display |
The status of system monitoring tests and the self-diagnosis status/result can be confirmed. |
|
ECU Identification |
Display |
Display |
Display |
ECM part number can be read. |
|
Network-DTC |
Display |
Display |
Display |
Display network DTC which ECM memorizes when performing "Diagnosis (All System)" |
*: The following emission-related diagnostic information is cleared when the ECM memory is erased.
- DTC (Diagnostic trouble codes)
- 1st trip diagnostic trouble codes
- Freeze frame data
- 1st trip freeze frame data
- System readiness test (SRT) codes
- Test values