Detailed Flow
- INTERVIEW THE CUSTOMER FOR THE SYMPTOM
Interview the customer for the symptom (the condition and the environment when the incident/malfunction occurs).
GO TO 2.
- CHECK SYMPTOM
Check the symptom from the customer information.
GO TO 3.
- CHECK WARNING LAMP OPERATION
Check air bag warning lamp operation in the user mode.
Are any malfunction detected?
YES
GO TO 5.
NO
GO TO 4.
- CHECK LOW VOLTAGE
CONSULT
Check low voltage.
Are any malfunction detected?
YES
GO TO 9.
NO
Check intermittent incident. Refer to Inspection .
- CHECK SELF DIAGNOSTIC RESULT
Select "Self Diagnostic Result" mode of "AIR BAG".
NOTE: Perform the following procedure if DTC is detected.- Record DTC. (Print them out.)
- Erase "Self Diagnostic Result" .
- Study the relationship between the malfunction that DTC or air bag warning lamp indicates and the symptom that the customer describes.
- Check related service bulletins for information.
Is DTC detected?
YES
GO TO 6.
NO
GO TO 7.
- PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC CONFIRMATION PROCEDURE for the DTC.
GO TO 8.
- PERFORM DIAGNOSIS ACCORDING TO WARNING LAMP OPERATION
- Check air bag warning lamp operation in the user mode.
- Perform Diagnosis Procedure for the air bag warning lamp operation.
GO TO 9.
- DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the DTC.
GO TO 9.
- REPAIR OR REPLACE THE MALFUNCTION PART
Repair or replace the malfunctioning part.
GO TO 10.
- ON BOARD DIAGNOSIS FUNCTION
Check self diagnostic result and air bag warning lamp operation in the user mode.
Is the malfunction repaired?
YES
Inspection End.
NO
GO TO 2.