Input Signal And Output Signal

Major signal transmission between each unit via communication lines is shown in the following table.

Component	Signal description
Yaw rate/side/decel G sensor	Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line ^*1 : Yaw rate signal Side G sensor signal Decel G sensor signal
ECM	Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication: Accelerator pedal position signal Engine speed signal Mainly receives the target throttle position signal from ABS actuator and electric unit (control unit) via CAN communication.
TCM	Mainly transmits the shift position signal to ABS actuator and electric unit (control unit) via CAN communication.
Transfer control unit ^*2	Mainly transmits the current 4WD mode signal to ABS actuator and electric unit (control unit) via CAN communication.
Steering angle sensor	Mainly transmits the steering angle sensor signal to ABS actuator and electric unit (control unit) via CAN communication.
Combination meter	Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication: SLIP indicator lamp signal VDC OFF indicator lamp

*1: Communication line between yaw rate/side/decel G sensor and ABS actuator and electric unit (control unit)

*2: Models with 4WD