Work Procedure

STEP 1
1. Close the door.
2. Ignition switch ON.
3. Continue pulling the power window switch UP until glass stops at fully closed position then release the switch. ¹
4. Keep pulling the switch for 5 seconds or more. ²
5. Continue pressing the power window switch DOWN until glass stops then release the switch.
6. Keep pressing the switch for 5 seconds or more. ²
  After glass moves again, keep pressing the switch until glass reaches the fully open position.
7. Continue pulling the power window switch UP (MANUAL-UP operation) until glass stops at fully closed position.
8. Check that AUTO-UP function operates normally.
NOTE: 1: If the power window stops before reaching the fully closed position: After the power window stops, release the switch then continue pulling the switch UP again and move the power window to the fully closed position.
2: After keep pulling or pressing 5 seconds or more, glass moves again.

GO TO 2.
STEP 2
Check anti-pinch function. Refer to Description .

Inspection End.