Ready Set Condition Table By Power Switch Operation
The vehicle can be set to READY by the following operations.
For details for the power supply position, refer to System Description .
NOTE:
- When an Intelligent Key is within the detection area of inside key antenna and when Intelligent Key backside is contacted to power switch, it is equivalent to the operations below.
- When setting the vehicle to READY, the BCM monitors READY set conditions:
- Brake pedal operating condition
- Shift position
- Vehicle speed
Vehicle speed: less than 2.5 MPH (4 km/h)
|
Vehicle condition |
Power switch operation frequency |
||
|
Shift position |
Brake pedal operation condition |
||
|
OFF -> ACC |
-- |
Not depressed |
1 |
|
OFF -> ACC -> ON |
-- |
Not depressed |
2 |
|
OFF -> ACC -> ON -> OFF |
-- |
Not depressed |
3 |
|
OFF -> READY ACC -> READY ON -> READY |
P or N |
Depressed |
1 |
|
READY -> OFF |
-- |
-- |
1 |
Vehicle speed: 2.5 MPH (4 km/h) or more
|
Vehicle condition |
Power switch operation frequency |
||
|
Shift position |
Brake pedal operation condition |
||
|
READY -> ACC |
-- |
-- |
Emergency stop operation |
|
ACC -> READY (Return operation after emergency stop operation while driving) |
N position |
-- |
1 |
Emergency stop operation
- Press and hold the power switch for 2 seconds or more.
- Press the power switch 3 times or more within 1.5 seconds.