Component Location

Courtesy of NISSAN NORTH AMERICA, INC.

A.	View with brake booster assembly removed	B.	Left front wheel area	C.	Upper side of brake pedal (view with instrument lower panel LH removed)
D.	Combination meter (view with combination meter removed)	E.	View of steering angle sensor removed	F.	Front of center console
G.	Left rear wheel area

No.	Component	Function
1.	ABS (Anti-lock Braking System) actuator and electric unit (control unit)	Refer to ABS Actuator and Electric Unit (Control Unit) .
2.	ECM (Engine Control Module)	Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication: Accelerator pedal position signal Engine speed signal Engine torque signal Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication: Engine torque request signal Refer to Component Location for detailed component location.
3.	Parking brake switch	Refer to Parking Brake Switch .
4.	Brake fluid level switch	Refer to Brake Fluid Level Switch .
5.	Vacuum sensor	Refer to Vacuum Sensor .
6.	Front wheel sensor LH (RH similar)	Refer to Wheel Sensor and Sensor Rotor .
7.	Stop lamp switch	Refer to Stop Lamp Switch .
8.	Combination meter	Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication: Brake fluid level switch signal Parking brake switch signal Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication: ABS warning lamp signal Brake warning lamp signal VDC OFF indicator lamp signal VDC warning lamp signal Refer to Component Location for detailed component location.
9.	Steering angle sensor	Refer to Steering Angle Sensor .
10.	Drive mode selector (VDC OFF switch)	Refer to VDC OFF Switch .
11.	Rear wheel sensor LH (RH similar)	Refer to Wheel Sensor and Sensor Rotor .