Data Monitor Mode

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item	Unit	Remarks
Steering torque	Nm	Displays steering torque detected by power steering torque sensor.
Demanded motor current	A	Displays the current value demanded by EPS motor.
Assist level	%	Displays the current percentage of the allowable assist ratio EPS motor.
EPS warning	Displays the EPS system warning status.
Demanded assistance torque	Nm	Displays the assist torque of EPS motor being output by the power steering control module.
Measured motor current	A	Displays the current value consumed by EPS motor.
ECU temperature	deg.C	Displays the temperature of the power steering control module.
Battery voltage	V	Displays the power supply voltage for power steering control module.
Auto stop start status	-	Displays but not used.
Vehicle speed	KPH	Displays the vehicle speed.
ENGINE STATUS	Status1 / Status2 / Status3	Displays the engine status.
Auto stop start sub-sys mode	-	Displays but not used.
Filter	-	Displays but not used.
Battery disconnect count	-	Displays the count of disconnected 12V battery terminal.