Work Procedure
- Perform action test to verify the customer's concern.
- Perform action test and check the system operation after system diagnosis.
- Fully understand the following items well before the road test;
- System description: System Description
- Handling precaution: Handling Precaution
- CHECK LDW SYSTEM SETTING
- Start the engine.
- Check that the LDW system setting can be enabled/disabled on the information display.
- Turn OFF the ignition switch and wait for 30 seconds or more.
- Check that the previous setting is saved when the engine starts again.
GO TO 2.
- ACTION TEST FOR LDW
- Enable the setting of the LDW system on the information display.
- Turn LDW system display ON (Speaker icon is ON at the "Lane" position).
- Check the LDW operation according to the following table.4.2 inch Information Display
Condition
Action
Display on information display
Steering vibration
LDW OFF
--
OFF
LDW ON
Vehicle speed is less than approx. 55 km/h (34 MPH)
--
LDW system indicator : White
Speaker icon : White
OFF
Vehicle speed is approx. 55 km/h (34 MPH) or more
Vehicle closes to lane marker
Turn signal is OFF or ON (Opposite to the deviate side)
--
Yellow (Blink)
ON
LDW system indicator : Yellow (Blink)
Speaker icon : White
Turn signal is ON (Deviate side)
--
LDW system indicator : White
Speaker icon : White
OFF
7 inch Information DisplayCondition
Action
Display on information display
Steering vibration
LDW OFF
--
OFF
LDW ON
Vehicle speed is less than approx. 55 km/h (34 MPH)
--
LDW system indicator : White
Speaker icon : White
OFF
Vehicle speed is approx. 55 km/h (34 MPH) or more
Vehicle closes to lane marker
Turn signal is OFF or ON (Opposite to the deviate side)
--
Yellow (Blink)
ON
LDW system indicator : Yellow (Blink)
Speaker icon : White
Turn signal is ON (Deviate side)
--
LDW system indicator : White
Speaker icon : White
OFF
NOTE: After the operating conditions of warning are satisfied, the warning continues until the vehicle speed reaches approximately 55 km/h (34 MPH). Refer to System Description .
INSPECTION END