Removal and Installation: Removal

WARNING: This page is about a different car, the 2021 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Remove shift selector finisher using the following steps:

CVT shift selector knob:

Slide the knob cover (1) down.

Courtesy of NISSAN NORTH AMERICA, INC.

Pull out the lock pin (2).
Pull the shift selector knob (3) and knob cover upwards to remove.

Using a suitable tool, release clips and pawls.

Courtesy of NISSAN NORTH AMERICA, INC.

: Pawl

: Metal clip

M/T shift selector knob:

Using suitable tool (A), remove shift knob finisher (1).

Courtesy of NISSAN NORTH AMERICA, INC.

Remove shift knob (1) as shown, below.

Courtesy of NISSAN NORTH AMERICA, INC.

Using a suitable tool, release clips of shift selector finisher (1).

Courtesy of NISSAN NORTH AMERICA, INC.

: Metal clip

Remove shift selector finisher.
Using a suitable tool release pawls and remove push-button ignition switch (1) from shift selector finisher (2).

Courtesy of NISSAN NORTH AMERICA, INC.

: Pawl

NOTE: CVT shown; M/T similar