LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2022 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Chassis Control System) >> Basic Inspection >> Additional Service When Replacing Chassis Control Module (With Built In Steering Angle Sensor) >> Work Procedure >> Before Replacing Chassis Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Before Replacing Chassis Control Module

WARNING: This page is about a different car, the 2021 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. SAVE "OPERATION LOG" 

    SYMBOL With CONSULT

    Save "Operation Log", according to the procedure of "Programming" in CONSULT Operation Manual.

    NOTE: Chassis control module part number is saved in "Operating Log" saved in CONSULT.
    • Replace the chassis control module. Refer to Removal and Installation .
    • After replacing the chassis control module, perform necessary work.
scientia non olet · About LEMON Manuals