CONSULT Function: Configuration

WARNING: This page is about a different car, the 2021 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Programming includes the following functions:

Function		Description
Configuration	Before replacing ECU	Allows the reading of vehicle specification (parts number) written in EPS control unit to store the specification in CONSULT. Allows the saving of vehicle specification (parts number) written in EPS control unit to store the specification in CONSULT.
Configuration	After replacing ECU	Allows the writing of vehicle information (parts number) stored in CONSULT into the EPS control unit.