LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2022 >> Titan PRO-4X >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (3 Of 3) >> Removal And Installation >> Fuel Pump Control Module (FPCM) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

  1. Remove the rear wheel and tire (LH) using power tool. Refer to Removal and Installation .
  2. Remove the rear fender protector (LH). Refer to Removal and Installation - Rear Fender Protector .
  3. Disconnect the harness connector from fuel pump control module.
  4. Remove bolts, and fuel pump control module and bracket assembly from vehicle.
  5. Remove screws, and fuel pump control module from fuel pump control module bracket (if necessary).