SRT & P-DTC Mode

SRT STATUS Mode 

• For items whose SRT codes are set, "CMPLT " is displayed on the CONSULT screen; for items whose SRT codes are not set, "INCMP " is displayed.
• "SRT STATUS " provides the presence or absence of permanent DTCs stored in ECM memory.

PERMANENT DTC STATUS Mode 

How to display permanent DTC status

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON.
5. Select "PERMANENT DTC STATUS " in "DTC & SRT CONFIRMATION " mode with CONSULT.
   NOTE: Permanent DTCs stored in ECM memory are displayed on the CONSULT screen to show if a driving pattern required for erasing permanent DTCs is complete (CMPLT) or incomplete (INCMP).
   CAUTION: Since the "PERMANENT DTC STATUS " screen displays the previous trip information, repeat the following twice to update the information: "Ignition switch OFF ", "Wait for more than 10 seconds " and "Ignition switch ON ".

Courtesy of NISSAN NORTH AMERICA, INC.

SRT WORK SUPPORT Mode 

This mode enables a technician to drive a vehicle to set the SRT while monitoring the SRT status.

PERMANENT DTC WORK SUPPORT Mode 

This mode enables a technician to drive a vehicle to complete the driving pattern that is required for erasing permanent DTC.