Work Procedure
- SAVING VEHICLE SPECIFICATION (BCM)
CONSULT
Perform "Before Replace ECU " of "Read / Write Configuration " to save or print current vehicle specification. Refer to Description .
NOTE: If "Before Replace ECU " of "Read / Write Configuration " cannot be used, use the "Manual Configuration " after replacing BCM.GO TO 2.
- SAVING VEHICLE SPECIFICATION (TPMS)
Perform "Before Replace ECU " of "Read / Write Configuration " to save or print current vehicle specification. Refer to Work Procedure .
NOTE: If "Before Replace ECU " of "Read / Write Configuration " cannot be used, use the "Manual Configuration " after replacing BCM.GO TO 3.
- REPLACE BCM
Replace BCM. Refer to Removal and Installation .
GO TO 4.
- WRITING VEHICLE SPECIFICATION (BCM)
Perform "After Replace ECU " of "Read / Write Configuration " or "Manual Configuration " to write vehicle specification. Refer to Description .
GO TO 5.
- REGISTER INTELLIGENT KEYS
For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
GO TO 6.
- WRITING VEHICLE SPECIFICATION (TPMS)
Perform "After Replace ECU " of "Read / Write Configuration " or "Manual Configuration " to write vehicle specification. Refer to Work Procedure .
GO TO 7.
- INITIALIZE TPMS
Perform TPMS initialization. Refer to Work Procedure .
Work End.