Work Procedure
- CHECKING AIR BAG DIAGNOSIS SENSOR UNIT TYPE ID
CONSULT
- Perform ECU setting according to the "Configuration " procedure in the "CONSULT Operation Manual ". Refer to CONSULT Operation Manual.
- Check if the Type ID of the air bag diagnosis sensor unit is displayed on the CONSULT screen.
Is Type ID displayed?
YES
GO TO 2.
NO
GO TO 3.
- WRITING VEHICLE SPECIFICATION
Follow the procedure displayed in CONSULT for writing the saved vehicle specification data to the air bag diagnosis sensor unit.
GO TO 5.
- CHECKING AIR BAG DIAGNOSIS SENSOR UNIT TYPE ID
Use Global Web-FAST (NISSAN parts catalogue) to search for the air bag diagnosis sensor unit of the applicable vehicle and find the Type ID. Refer to "FAST linked search " in the "CONSULT Operation Manual ".
NOTE: For FAST linked parts, even if a system number cannot be acquired from the air bag sensor unit before replacement, the applicable ECU setting operation can still be performed by acquiring the system number from Global Web-FAST (NISSAN parts catalogue).GO TO 4.
- WRITING VEHICLE SPECIFICATION (FAST LINKED)
Perform ECU setting according to the "FAST linked search " procedure in the "CONSULT Operation Manual ". Refer to CONSULT Operation Manual.
GO TO 5.
- CHECK ALL ECU SELF DIAGNOSTIC RESULT
- Erase all ECU self-diagnosis results.
- Ignition switch OFF.
- Ignition switch ON.
- Check that all ECU self-diagnosis results have no DTC.
Work End.