DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | |
|---|---|---|---|
| C1608 | CONTROL UNIT (Control unit) | Diagnosis condition | When engine is running. |
| Signal (terminal) | - | ||
| Threshold | When the internal malfunction is detected in EPS control unit. | ||
| Diagnosis delay time | 12 seconds or more. | ||
POSSIBLE CAUSE
EPS control unit
FAIL-SAFE
Manual steering state
DTC CONFIRMATION PROCEDURE
- PRECONDITIONING
- If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place the ignition switch in the OFF position and wait at least 10 seconds before conducting the next test.
>>
GO TO 2.
- DTC REPRODUCTION PROCEDURE
CONSULT
- Ignition switch OFF to ON.
- Select "Self Diagnostic Result" mode of "EPS/DAST 3".
Is DTC "C1608" detected?
YES>>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO>>
Inspection End.