DTC Description
DTC DETECTION LOGIC
NOTE:
- If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description .
- If DTC B2601 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description .
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| B2601 | SHIFT POSITION (Shift position) | Diagnosis condition | When the vehicle is set to Ready. |
| Signal (terminal) | - | ||
| Threshold | When there is a difference between P position signal from VCM and P position signal from IPDM E/R (CAN). | ||
| Diagnosis delay time | - | ||
POSSIBLE CAUSE
- Electric shift selector (park position switch)
- BCM
- IPDM E/R
- Harness or connector (The CAN communication line is open or shorted.)
- Harness or connector [Electric shift selector (park position switch) circuit is open or shorted.]
FAIL-SAFE
-