Drive Mode Indicator
DESIGN/PURPOSE
The SPORT mode indicator inform the driver that the vehicle is in SPORT mode.
BULB CHECK
Not applicable
SYSTEM DIAGRAM
SIGNAL PATH
- TCM receives SPORT mode switch signal from A/C auto amp. via CAN communication. Based on the signal, TCM transmits SPORT mode signal to ECM via CAN communication.
- ECM transmits SPORT mode indicator signal to combination meter via CAN communication. Based on the signal, combination meter illuminates SPORT mode indicator.
LIGHTING CONDITION
When all of the following conditions are satisfied.
- Ignition switch: ON
- The SPORT mode switch is pressed when the SPORT mode indicator is OFF
SHUTOFF CONDITION
When any of the condition listed below is satisfied.
- Ignition switch: Other than ON
- The SPORT mode switch is pressed when the SPORT mode indicator is ON.