Work Procedure

STEP 1
1. 1. Close the door.
  2. Ignition switch ON.
  3. Continue pulling the power window switch UP until glass stops at fully closed position then release the switch. *1
  4. Keep pulling the switch for 5 seconds or more. *2
  5. Continue pressing the power window switch DOWN until glass stops then release the switch.
  6. Keep pressing the switch for 5 seconds or more. *2 After glass moves again, keep pressing the switch until glass reaches the fully open position.
  7. Continue pulling the power window switch UP (MANUAL-UP operation) until glass stops at fully closed position.
  8. Check that AUTO-UP function operates normally.
  NOTE: *1*2
>>

GO TO 2.
STEP 2
1. Check anti-pinch function. Refer to Description .
>>

Inspection End.