Work Procedure

Check that the engine is cold [coolant temperature: 50 Deg. C (122 Deg. F) or less].

Is the engine cold?

YES>>

GO TO 2.

NO>>

Park the vehicle at a cold place and cool down the engine. And then, GO TO 2.

With CONSULT

1. Start the engine and let it idle at least 10 seconds.
2. On CONSULT screen, select "ENGINE" >> "Active Test" >> "WASTEGATE ACTUATOR".
3. Operate the actuator from the fully closed position to the fully open position and check that actual value is within the range of (- 0. 00052) - (+ 0. 00052) m when the target value is set at 0 m.

YES>>

END