DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | |
| P2017 | IN/MANIFOLD RUNNER POS SEN B1 (Intake manifold runner position sensor/switch circuit high bank 1) | Diagnosis condition | Engine running at idle |
| Signal (terminal) | Intake manifold runner control valve position sensor | ||
| Threshold | An excessively high voltage from the sensor is sent to ECM | ||
| Diagnosis delay time | - | ||
POSSIBLE CAUSE
- Harness or connectors (Intake manifold runner control position sensor circuit is shorted.)
- Intake manifold runner control position sensor
FAIL-SAFE
| Engine operating condition in fail-safe mode | ||
|---|---|---|
| Fail safe mode | Vehicle behavior | |
| Device fix mode |
|
|