LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2023 >> Sentra S >> Repair and Diagnosis (Single Page) >> General Information >> OEM General Information >> Basic Inspection >> Consult Checking System >> Function and System Application
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function and System Application

FUNCTION 

Mode Function
All DTC Reading Display all DTCs or diagnostic items that all ECUs are recording and judging.
Work Support This mode enables a technician to adjust some devices faster and more accurately.
Self Diagnostic Results Retrieve DTC from ECU and display diagnostic items.
CGW Information Displays and sets the CGW status. Refer to CONSULT Function.
Data Monitor Monitor the input/output signal of the control unit in real time.
CAN Diagnosis This mode displays a network diagnosis result about CAN by diagram.
CAN Diagnosis Support Monitor It monitors the status of CAN communication.
Active Test Send the drive signal from CONSULT to the actuator. The operation check can be performed.
ECU Identification Display the ECU identification number (part number etc.) of the selected system.
Configuration Function to READ/WRITE vehicle configuration.
SRT Confirmation The state of System Readiness Test (SRT) items, the presence or absence of permanent DTC*, and driving conditions can be checked.
DTC work support DTC reproduction procedure can be performed speedily and precisely.
Others Other results or histories, etc. that are recorded in ECU are displayed.

*: Permanent DTC is not applied for regions where it is not mandated.

SYSTEM APPLICATION 

*1

System All DTC Reading Work Support Self Diagnostic Results CGW Information Data Monitor CAN Diagnosis CAN Diagnosis Support Monitor Active Test ECU Identification Configuration SRT Confirmation DTC work support Others
ENGINE x x x x x x x x x - x x -
TRANSMISSION x x x x x x x - x - x -
  • CALIB DATA
AIR BAG x - x x x x - - x x - -
  • TROUBLE DIAG RECORD
METER / M x - x x x x - - x x - -
  • Warning History
AIR PRESSURE MONITOR1 x x x x x - - - x x - - -
BCM x x x x x x x x x x - - -
IPDM E/R x - x x x x - x x x - - -
HVAC2 - x x x x x x x x - - - -
HVAC3 - x x x x x x x x - - - -
ABS x x x x x x - x x x - - -
ICC / ADAS1 x x x x x x - x x x - - -
LANE CAMERA x x x x x x - - x x - - -
SIDE RADAR LEFT x - x x x x - x x x - - -
SIDE RADAR RIGHT x - x x x x - x x x - - -
TELEMATICS1 x - x x x x - - x - - - -
HANDS FREE MODULE1 x x x x x x - - x x - - -
SONAR1 x - x x x x - x x x - - -
MULTI AV x - x x x x - - x x - - -
EPS/DAST 3 x - x x x x - - x x - - -
CHASSIS CONTROL x - x x x x - x x x - - -
8CH CAN GATEWAY x - x x - x x - x - - - -

x : Applicable

1: If equipped

2: With auto A/C

3: With manual A/C