April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Description

DTC DETECTION LOGIC

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P062F	CONTROL MODULE (Internal control module EEPROM error)	Diagnosis condition	Ignition switch ON
		Signal (terminal)	-
		Threshold	ECM calculation is function malfunctioning
		Diagnosis delay time	-

POSSIBLE CAUSE

ECM

FAIL-SAFE

Not applicable

DTC CONFIRMATION PROCEDURE

PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.
TESTING CONDITION: Before performing the following procedure, confirm that battery voltage is between 11 V or more with ignition switch ON.

>>

GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON and wait at least 1 second.
2. Turn ignition switch OFF and wait at least 10 seconds.
3. Repeat step 1 and 2 for 10 times.
4. Erase DTC.
5. Turn ignition switch OFF and wait at least 10 seconds
6. Turn ignition switch ON.
7. Check the DTC.
Is DTC P062F detected?

YES>>

Refer to DTC Diagnosis Procedure .

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO-2>>

Confirmation after repair: INSPECTION END