ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Removal and Installation

REMOVAL 

1. Remove hood ledge cover (RH) and cowl top cover (RH). Refer to Exploded View .
2. Remove the battery and battery tray. Refer to Exploded View .
3. Move IPDM E/R and relay box to a location that does not inhibit work. Refer to Removal and Installation .
4. Remove the bracket. Refer to Removal and Installation .
5. Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector .
6. Remove electric intake valve timing control module from the vehicle.

INSTALLATION 

Install in the reverse order of removal.