Diagnosis Procedure

PERFORM SELF-DIAGNOSIS
With CONSULT
1. Ignition switch OFF to ON.
2. Erase self-diagnostic results for "EPS/DAST 3".
3. Ignition switch OFF and wait for at least 10 seconds.
4. Start the engine.
  CAUTION:
  Never drive the vehicle.
5. Perform self-diagnosis for "EPS/DAST 3".
Is DTC "C1607-01" detected?

YES>>

Replace the power steering control module (steering gear assembly). Refer to Removal and Installation .

NO>>

Check terminals and connection of each harness connector for malfunctioning conditions.