ENGINE CONTROL SYSTEM : Commercial Service Tools or/and Repair Part

Tool name (TechMate No.)		Description
Fuel pressure gauge (-)	Courtesy of NISSAN NORTH AMERICA, INC.	Measuring fuel pressure NOTE: Use the pressure gauge which can measure 690 kpa (6.9 bar, 7.0 kg/cm2 , 100 psi) or more.
Oxygen sensor thread cleaner i.e.: (NI-43897-18) (NI-43897-12)	Courtesy of NISSAN NORTH AMERICA, INC.	Reconditioning the exhaust system threads before installing a new oxygen sensor. Use with anti-seize lubricant shown below. a: 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor b: 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
Leak detector i.e.: (NI-41416)	Courtesy of NISSAN NORTH AMERICA, INC.	Locates the EVAP leak
EVAP service port adapter i.e.: (NI-41413-OBD)	Courtesy of NISSAN NORTH AMERICA, INC.	Applies positive pressure through EVAP service port
EVAP service port	Courtesy of NISSAN NORTH AMERICA, INC.	Connects pressure pump to EVAP line (Part No. 149393S500) NOTE: This tool is used if the vacuum delay valve does not have EVAP service port.
Insulation resistance tester (Multi tester)	Courtesy of NISSAN NORTH AMERICA, INC.	Measuring insulation resistance, voltage, and resistance