CONSULT Function
WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT FUNCTIONS
CONSULT performs the following functions via communication with the around view monitor control unit:
| Diagnosis Mode | CGW Status | Description | ||
|---|---|---|---|---|
| Restricted Mode | Diag Test Mode | Open Mode | ||
| ECU Identification | Display | Display | Display | The around view monitor control unit part number is displayed. |
| Self Diagnostic Result | Display | Display | Display | The around view monitor control unit self diagnostic results are displayed. |
| CGW Information | Display | Display | Display |
|
| Data Monitor | Display | Display | Display | The around view monitor control unit input/output data is displayed in real time. |
| Work Support | Non-display | Non-display | Display | Save or write VIN information. |
| Configuration | Display | Display | Display |
|
| CAN Diag Support Monitor* | Display | Display | Display |
NOTE:
|
| Network-DTC* | Display | Display | Display | Display network DTC which around view monitor control unit memorizes when performing "Diagnosis (All System)". |
*: Displays when performing "Diagnosis (All System)".
ECU IDENTIFICATION
The part number of around view monitor control unit is displayed.
SELF DIAGNOSTIC RESULT
Refer to DTC Index .
CGW INFORMATION
Displays the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status from Restricted mode to Diag Test Mode/Open Mode. For the method of switching CAN Gateway status, refer to CONSULT Function .
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item | Description |
|---|---|
| ST ANGLE SENSOR SIGNAL [On/Off] | Indicates condition of steering angle sensor signal. |
| REVERSE SIGNAL [On/Off] | Indicates selector lever position. |
| VEHICLE SPEED SIGNAL [mph/km/h] | Indicates condition of vehicle speed signal. |
| CAMERA SWITCH SIGNAL [On/Off] | Indicates condition of camera switch signal. |
| CAMERA OFF SIGNAL [On/Off] | Indicates condition of camera OFF signal. |
| ST ANGLE SENSOR TYPE [Absolute] | Indicates steering angle sensor type. |
| STEERING GEAR RATIO TYPE [Type 0] | Indicates steering gear ratio type. |
| STEERING POSITION [LHD/RHD] | Indicates LH or RH drive type. |
| REAR CAMERA IMAGE SIGNAL [OK/NG] | Indicates condition of camera image signal. |
| F-CAMERA IMAGE SIGNAL [OK/NG] | Indicates condition of camera image signal. |
| DR-SIDE CAMERA IMAGE SIG [OK/NG] | Indicates condition of camera image signal. |
| PA-SIDE CAMERA IMAGE SIG [OK/NG] | Indicates condition of camera image signal. |
| ILL [ON/OFF] | Indicates condition of illumination signal. |
| TURN SIGNAL [ON/OFF] | Indicates condition of turn signal. |
WORK SUPPORT
| Support Item | Setting | Description |
|---|---|---|
| CALIBRATING CAMERA IMAGE (FRONT CAMERA) | STATUS | Performs calibration of front camera. |
| AXIS X | ||
| AXIS Y | ||
| ROTATE | ||
| CALIBRATING CAMERA IMAGE (PASS-SIDE CAMERA) | STATUS | Performs calibration of passenger side camera. |
| AXIS X | ||
| AXIS Y | ||
| ROTATE | ||
| CALIBRATING CAMERA IMAGE (DR-SIDE CAMERA) | STATUS | Performs calibration of driver side camera. |
| AXIS X | ||
| AXIS Y | ||
| ROTATE | ||
| CALIBRATING CAMERA IMAGE (REAR CAMERA) | STATUS | Performs calibration of rear view camera. |
| AXIS X | ||
| AXIS Y | ||
| ROTATE | ||
| FINE TUNING OF BIRDS-EYE VIEW | STATUS | Confirmation and adjustment of difference between each camera can be performed. |
| SELECT | ||
| AXIS X | ||
| AXIS Y | ||
| ROTATE | ||
| REAR WIDE-VIEW FIXED GUIDE LINE CORRECTION | STATUS | Correct rear wide-view fixed guide line positions. |
| AXIS X | ||
| AXIS Y | ||
| PATTERN | ||
| NON-VIEWABLE AREA REMINDER | ON | ON/OFF setting of non-viewable area can be performed. |
| OFF | ||
| PREDICTIVE COURSE LINE DISPLAY | ON | ON/OFF setting of predictive course line display can be performed. |
| OFF | ||
| INITIALIZE CAMERA IMAGE CALIBRATION | - | Factory image calibration restoration can be performed. |
| STEERING ANGLE SENSOR ADJUSTMENT | - | Steering angle sensor neutral position adjustment can be performed. |
| CAUSE OF ENTRY CANCEL | - | Cause item can be cancelled. |
| MOD FUNCTION | ON | ON/OFF setting of moving object detection (MOD) can be performed. |
| OFF |
CONFIGURATION
Configuration has three functions as follows.
| Function | Description | |
|---|---|---|
| Read/Write Configuration | Before Replace ECU | Allows the reading of vehicle specification written in AV control unit to store the specification in CONSULT. |
| After Replace ECU | Allows the writing of the vehicle information stored in CONSULT into the AV control unit. | |
| Manual Configuration | Allows the writing of the vehicle specification into the AV control unit by hand. | |