Removal and Installation

WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL

Disconnect the harness connector from the accelerator pedal assembly.
Remove bolts and remove accelerator pedal assembly.
CAUTION:
- Do not disassemble accelerator pedal assembly.
- Do not remove accelerator pedal position sensor from accelerator pedal assembly.
- Do not drop or impact the accelerator pedal assembly.
- Do not expose the accelerator pedal assembly to water.

INSTALLATION

Installation is in the reverse order of removal.

Insert the locating hook and pin into the brake pedal bracket.

CAUTION:

Do not squeeze the locating hook into the brake pedal bracket when inserting the locating pin into the hole on the brake pedal bracket side.