Removal and Installation

WARNING: This page is about a different car, the 2023 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL

Remove shift selector finisher using the following steps:

CVT shift selector knob:

Slide the knob cover (1) down.

Courtesy of NISSAN

Pull out the lock pin (2).
Pull the shift selector knob (3) and knob cover upwards to remove.

Using a suitable tool, release clips and pawls.

Courtesy of NISSAN

: Pawl : Metal clip

M/T shift selector knob:

Using suitable tool (A), remove shift knob finisher (1).

Courtesy of NISSAN

Remove shift knob (1) as shown, below.

Courtesy of NISSAN

Using a suitable tool, release clips of shift selector finisher (1).

Courtesy of NISSAN

: Metal clip

Remove shift selector finisher.
Using a suitable tool release pawls and remove push-button ignition switch (1) from shift selector finisher (2).

Courtesy of NISSAN

: Pawl

NOTE: CVT shown; M/T similar

INSTALLATION

Installation is in the reverse order of removal.