Work Procedure

STEP 1
1. 1. Ignition switch ON.
  2. Operate the main power window and door lock/unlock switch to fully open the window. (This operation is unnecessary if the window is already fully open)
  3. Operate the main power window and door lock/unlock switch in the UP position (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
  4. Release the switch and check that AUTO-UP function operates normally.
>>

GO TO 2.
STEP 2
1. Check anti-pinch function. Refer to Work Procedure .
>>

End.