LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1988 >> Toronado Base >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Axle Shafts - Front >> Torque Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft-To-Transaxle Nut 27 (37)
Brake Hose-To-Strut 14-20 (19-27)
Caliper Bracket-To-Knuckle 63 (85)
Hub/Bearing Assembly-To-Knuckle Bolt 70 (95)
Hub Nut 180 (244)
Intermediate Shaft-To-Transaxle 18 (24)
Intermediate Shaft Bracket-To-Engine 41 (56)
Lower Ball Joint-To-Control Arm Bolt/Nut 50 (68)
To-Steering Knuckle Nut (1)(2)
Strut-To-Knuckle 145 (197)
Tie Rod End Nut (3)
Trailing Arm-To-Knuckle Bolt -
Wheel Lug Nuts 100 (136)
(1) Tighten to 88 INCH lbs. (10 N.m), then turn nut an additional 120°. Minimum torque of 37 ft. lbs. (50 N.m) must be obtained.
(2) On replacement ball joint, tighten nut to 81 ft. lbs. (110 N.m) at initial installation only.
(3) Tighten to 88 INCH lbs. (10 N.m), then turn nut an additional 1/3 turn. Minimum torque of 33 ft. lbs. (45 N.m) must be obtained.