Inside Remote Handle

Inside Remote Handle:

All inside remote handles are the pull-in type. All remote handles actuate the door lock through a connecting rod. Remote handles are attached to the door inner panel with rivets.

Remove or Disconnect

Important
^ Glass must be in the full-up position.

1. Door trim panel
2. Water deflector.
3. Rod (3) from handle (1).
4. Rivet (2) using 3/16" drill bit.
5. Inside handle (1).

Install or Connect

1. Rod (3) to inside handle (1).
2. Inside remote handle (1) to inner panel by inserting tabs on handle into slots on inner panel.
3. Rivet (2).
4. Water deflector.
5. Door trim panel.