LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1991 >> Custom Cruiser >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Regulator >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Window Regulator: Removal

  1. Remove door trim panel. See TRIM PANEL  .
  2. Remove water deflector. See WATER DEFLECTOR  .
    • Raise window glass (94) as necessary. See Figure .
      WARNING: Tape the door glass to the door frame. If the glass drops into the door, personal injury or glass damage may result.
    • Support window glass (94) in position needed to access rivets (96) by taping it to door frame using cloth-backed body tape.
  3. Remove door latch module assembly.
  4. Remove rivets (96) connecting window sash (92) to window regulator sash (95), using a drill and 5/16-inch drill bit.
  5. Remove screws (99) and reinforcement, if necessary, securing window regulator cam assembly (100 or 102) to door panel. See Figure for front doors or Figure for rear doors.
  6. Remove electrical connection.
  7. Remove rivets (97) securing window regulator (98 or 101) to door panel using a drill and a 5/16" drill bit.
  8. Install window regulator assembly.
scientia non olet · About LEMON Manuals