LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 1991 >> Toronado Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Ignition Coil (C3I) >> Removal & Installation (3.8L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (3.8L)

Disconnect negative battery cable. Remove spark plug wires from coil pack. Remove coil-to-ignition module Torx screws. Tilt coil assembly back. Disconnect module connectors and remove coil pack. To install, reverse removal procedure. Tighten retaining bolts to specifications. See TORQUE SPECIFICATIONS  table at end of article.

scientia non olet · About LEMON Manuals