Trouble Code Definition
ECM/PCM TROUBLE CODE DEFINITION
| Code No. |
Circuit Affected |
| 12 |
No RPM Reference Pulse |
| 13 |
Open Oxygen (O2) Sensor Circuit |
| 14 |
CTS Signal Voltage Low |
| 15 |
CTS Signal Voltage High |
| 17 |
RPM Signal Problem |
| 21 |
TPS Signal Voltage High |
| 22 |
TPS Signal Voltage Low |
| 23 |
MAT Sensor Signal Voltage High |
| 24 |
Vehicle Speed Sensor Circuit |
| 25 |
MAT Sensor Signal Voltage Low |
| 26 |
Quad-Driver Error |
| 27, 28 & 29 |
Gear Switch Problem |
| 31 |
Park/Neutral Switch |
| 32 |
EGR System Error |
| 33 |
MAP Sensor Signal Voltage High |
| 34 |
MAF Sensor Signal Voltage Low |
| 35 |
IAC Idle Speed Error |
| 36 |
Transaxle Shift Circuit |
| 38 |
Brake Switch |
| 39 |
TCC |
| 41 |
Cam Sensor Circuit |
| 42 |
EST Circuit Open Or Grounded |
| 43 |
ESC Error |
| 44 |
Lean Exhaust Indication |
| 45 |
Rich Exhaust Indication |
| 47 |
ECM/BCM Communications Failure (Toronado/Trofeo) |
| 48 |
Misfire Diagnosis |
| 51 |
Faulty PROM, MEM-CAL Or ECM/PCM |
| 52 |
Faulty/Missing CAL-PAC Or MEM-CAL |
| 53 |
System Overvoltage Anti-Theft System Fault |
| 54 |
Fuel Pump Voltage Low |
| 55 |
ECM/PCM Error |
| 58 |
Anti-Theft System Fault |
| 61 |
Cruise Vent Solenoid |
| 62 |
Cruise Vacuum Solenoid |
| 65 |
Cruise Servo Position |
| 66 |
A/C Pressure Sensor Circuit |
| 67 |
Cruise Engage Switches |
| 68 |
Cruise System Problem |
NOTE:
Use trouble code charts only if SERVICE ENGINE SOON light is illuminated (indicating a current problem exists). Exceptions are Code 13, 15, 24, 44 and 45 charts, which may be used to help diagnose intermittent codes. Anytime control module-related Codes 51, 52 or 55 are displayed with another code, start with 50-series code, and then proceed to lower numbered codes.