Abs/TCC Switch Adjustment
WARNING: This page is about a different car, the 1998 Pontiac Bonneville, 1998 Oldsmobile Regency, 1998 Oldsmobile LSS, 1998 Oldsmobile Eighty-Eight, and 1998 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
Brake booster pushrod must be assembled to brake pedal before ABS/TCC switch can be adjusted. Do not press brake pedal during adjustment procedure. Insert switch into retainers until fully seated against brake pedal bracket. Twist switch clockwise about 60 degrees until travel stop is reached. When switch is fully locked, electrical connector should face 3 o'clock position.