DTC B2735: PASSLOCK(R) Programming Active Mode: Testing
- Perform system check. See BCM DIAGNOSTIC SYSTEM CHECK under SYSTEM TESTS. Go to next step.
- Perform THEFT DETERRENT RELEARN under PROGRAMMING. If BCM is programmed successfully, go to next step. If BCM will not program, go to step 4).
- Check for DTCs B2722 and B2723. If DTCs exist, go to appropriate DIAGNOSTIC TEST. If DTCs do not exist, go to step 5).
- Clear DTCs. If DTC B2735 resets, go to step 3). If no DTCs exist, system is okay.
- Replace BCM. Perform NEW BCM SETUP under PROGRAMMING. Go to next step.
- Turn ignition off. Reinstall all connectors and components. turn ignition on. Clear DTCs. Recheck system. See BCM DIAGNOSTIC SYSTEM CHECK under SYSTEM TESTS.