Installation Procedure

Installation Procedure
1. Install the SDM (3) to the floor sheetmetal (2).
2. Install the SDM mounting fasteners (1).

NOTICE: Refer to Fastener Notice.

Tighten
Tighten fasteners to 9 N.m (80 lb. in).
3. Install the SDM harness connector (2) to the SDM (1).

Description:

4. Install the Connector Position Assurance (CPA) (3) to the SDM harness (2) connector.
5. Install the sill plate (RH).
6. Install the passenger front seat.
7. Enable the SIR system.