Installation Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Install the hub and bearing assembly (2) to the vehicle. Refer to WHEEL BEARING/HUB REPLACEMENT - FRONT in Front Suspension.

Fig 1: View Of Hub And Bearing Assembly
Courtesy of GENERAL MOTORS CORP.
Install the front wheel speed sensor jumper harness electrical connector (1).

Fig 2: Installing Front Wheel Speed Sensor Jumper Harness Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Install the wheel and tire assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
Lower the vehicle.
Turn the ignition switch to the ON position with the engine off.
Perform the DIAGNOSTIC SYSTEM CHECK - ABS .