LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2001 >> Aurora 3.5 H >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control System >> Repair Instructions >> Dash Integration Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Before replacing the Dash Integration Module (DIM), record the personalization settings to transfer to the new module (if they are available).
  2. Remove the right closeout/ insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT -- RIGHT .
  3. Remove the DIM from the bracket by releasing the tab behind the module.
  4. Disconnect the electrical connectors (1) from the DIM (2).
Fig 1: Disconnecting DIM Electrical Connectors
G01801266Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals