HVAC Control Module Replacement

HVAC CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the center IP trim panel. Refer to Trim Panel Replacement - IP Center in Instrument Panel, Gauges and Warning Indicators.
2. Pinch the tabs on the control module and pull rearward on the control module to remove from the instrument panel.

INSTALLATION PROCEDURE




1. Install the control module into the instrument panel ensuring the tabs are seated into the IP.
2. Install the center IP trim panel. Refer to Trim Panel Replacement - IP Center in Instrument Panel, Gauges and Warning Indicators.
3. Reprogram the control module. Refer to BCM Programming/RPO Configuration (DIM) or BCM Programming/RPO Configuration (IPM) or BCM Programming/RPO Configuration (RIM) in Body Control Modules System.