Scan Tool Data Definitions - Drivers Door Module (DDM)

Battery Voltage: The scan tool displays 0-20 volts. The voltage as received on the battery positive voltage circuit of the Module or the 72-08 battery voltage message from the DIM over class 2 lines.

Drivers Door Jamb Sw.: The scan tool displays On/Off. The state of the drivers door jamb switch. On indicates the door is open and Off indicates the door is closed.

Left Rear Door Jamb Sw.: The scan tool displays On/Off. The state of the left rear door jamb switch. On indicates the door is open and Off indicates the door is closed.

Pass. Door Jamb Sw.: The scan tool displays On/Off. The state of the right front door jamb switch. On indicates the door is open and Off indicates the door is closed.

Rt. Rear Door Jamb Sw.: The scan tool displays On/Off. The state of the right rear door jamb switch. On indicates the door is open and Off indicates the door is closed.