Cruise Control Switch: Service and Repair

Cruise Control Lever Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the SIR System.





2. Remove the steering wheel.
3. Remove the access plate covering the back of the switch.





4. Remove the cruise control lever retaining screws (1).
5. Disconnect the electrical connector.

Installation Procedure
1. Connect the electrical connector.





2. Position the cruise control lever (2) in the opening on the steering wheel.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the cruise control lever retaining screws (1).
Tighten the cruise control lever retaining screws (1) to 2.30 Nm (20 inch lbs.).





4. Install the access plate.
5. Install the steering wheel.